AMD AMF (Advanced Media Framework) is the hardware video encoder in AMD Radeon GPUs (RX 400 series and newer). It uses the Video Core Engine (VCE) for H.264/HEVC encoding with minimal CPU overhead. For PSP streaming, AMF works well when configured correctly — our A/B testing showed some default settings cause failures while others deliver excellent performance.
This is one backend-specific guide in the full host-encoder guidance set:
- NVIDIA users: see
docs/NVENC_SETTINGS_GUIDE.md - Intel users: see
docs/QSV_SETTINGS_GUIDE.md - Software encoder users: see
docs/SOFTWARE_ENCODING_GUIDE.md
For all backends, the shared compatibility baseline is the same: H.264 Baseline + CAVLC with conservative starting bitrate/resolution.
Sunshine vs Apollo: All AMD encoder settings are identical between Sunshine and Apollo (ClassicOldSong fork). The encoding pipeline is shared code.
Web UI: Configuration → Video → Encoder
Default: auto-detect
Config key: encoder
Forces the server to use AMD's VCE hardware encoder. Set this explicitly if your PC has both an AMD and NVIDIA GPU. Otherwise leave on auto.
Web UI: Configuration → Video → AMD AMF → Usage
Default: ultralowlatency
Config key: amd_usage
Valid values: ultralowlatency, lowlatency, lowlatency_high_quality, webcam, transcoding
This is the most impactful setting. It sets a base "template" of hidden internal encoder parameters.
| Value | Speed | Quality | Latency | Notes |
|---|---|---|---|---|
ultralowlatency |
Fastest | Lowest | Lowest | Best for twitch gaming |
lowlatency |
Fast | Low-Medium | Low | Good balance |
lowlatency_high_quality |
Medium | High | Medium | Best visual quality while still streaming |
webcam |
Slow | Medium | High | Not useful for game streaming |
transcoding |
Slowest | Highest | Highest | Not useful for real-time streaming |
PSP recommendation: ultralowlatency or lowlatency. Our A/B testing showed lowlatency_high_quality actually delivered the highest FPS (38 fps peak) — likely because it produces cleaner frames that decode faster on the PSP.
Web UI: Configuration → Video → AMD AMF → Rate Control
Default: vbr_latency
Config key: amd_rc
Valid values: vbr_latency, cbr, vbr_peak, cqp
Controls how the encoder manages bitrate (how many bits each frame gets).
| Value | What It Does | Good For |
|---|---|---|
vbr_latency |
Targets your bitrate but can flex up/down for complex scenes | General use — recommended |
cbr |
Strict constant bitrate — every second uses exactly the same bits | Bandwidth-limited networks |
vbr_peak |
Variable bitrate with a hard ceiling — never exceeds max | Preventing spikes |
cqp |
Ignores bitrate entirely — uses fixed quality level (QP) | Avoid for PSP — can exceed bandwidth |
PSP recommendation: vbr_latency. Our testing showed cqp mode caused complete streaming failure because it doesn't respect the 384 kbps bitrate limit.
Web UI: Configuration → Video → AMD AMF → Quality Preset
Default: balanced
Config key: amd_quality
Valid values: speed, balanced, quality
| Value | Effect |
|---|---|
speed |
Encode as fast as possible, accept lower quality |
balanced |
Middle ground |
quality |
Spend more time encoding for better-looking frames |
PSP recommendation: balanced or speed. At PSP preset sizes, the quality difference is hard to see on the PSP's small screen.
Web UI: Configuration → Video → AMD AMF → Entropy Coding
Default: auto
Config key: amd_coder
Valid values: auto, cavlc, cabac
This only affects H.264 streams (not HEVC or AV1). It controls how the compressed video data is packed.
| Value | Compression | Decode Speed | Notes |
|---|---|---|---|
auto |
Let encoder choose | Varies | Safest option |
cavlc |
Less efficient | Faster to decode | Better for weak decoders |
cabac |
More efficient (~10-15% smaller) | Slower to decode | Better quality per bit |
PSP recommendation: cavlc (or cabac if your host's AMD AMF encoder defaults to CABAC and ignores the CAVLC selection). In v1.4.0, client-side CABAC decoding has been fully optimized and is supported without stalls or crashes. However, CAVLC remains recommended if configurable, as it consumes slightly less PSP CPU power.
Web UI: Configuration → Video → AMD AMF → Enforce HRD
Default: disabled
Config key: amd_enforce_hrd
Valid values: enabled, disabled
HRD (Hypothetical Reference Decoder) forces the encoder to produce a bitstream that any standard-compliant decoder can handle without buffer overflow. In practice, it makes bitrate control stricter.
PSP recommendation: disabled. Enabling HRD can cause visual artifacts on some AMD cards. Our testing showed it works but adds no benefit at PSP bitrates.
Web UI: Configuration → Video → AMD AMF → Pre-Analysis
Default: disabled
Config key: amd_preanalysis
Valid values: enabled, disabled
When enabled, the encoder scans each frame before encoding it to make smarter compression decisions. This adds ~1 frame of latency.
PSP recommendation: disabled. The PSP is already latency constrained — adding latency is not worth the marginal quality improvement.
Web UI: Configuration → Video → AMD AMF → VBAQ
Default: enabled
Config key: amd_vbaq
Valid values: enabled, disabled
VBAQ allocates more bits to smooth/flat areas (where blocking artifacts are most visible) and fewer bits to busy/textured areas (where artifacts are hidden by detail).
PSP recommendation: enabled. Particularly helpful at low bitrates like 384 kbps. No downside.
Web UI: Configuration → Video → QP
Default: 28
Config key: qp
Valid range: 0–51
Only used when amd_rc = cqp. Higher values = more compression = lower quality but smaller bitstream. Lower values = less compression = better quality but bigger bitstream.
| Range | Quality Level |
|---|---|
| 0–18 | Visually lossless (huge bitrate) |
| 18–28 | High quality |
| 28–35 | Medium quality |
| 35–51 | Low quality / high compression |
PSP recommendation: Not applicable — use vbr_latency instead of cqp. If you must use CQP, try 28–32.
Web UI: Configuration → Network → FEC Percentage
Default: 20
Config key: fec_percentage
Valid range: 1–255
FEC adds redundant data to the stream so the PSP can recover from lost Wi-Fi packets without requesting a full new frame (IDR). Higher values = more resilience but more bandwidth used for redundancy.
| Value | Use Case |
|---|---|
| 10–15 | Excellent Wi-Fi, minimal packet loss |
| 20 | Default — good for most setups |
| 30–50 | Poor Wi-Fi, frequent packet loss |
| 50+ | Very unreliable network — but wastes bandwidth |
PSP recommendation: 35 as a starting point. Lower values may work on clean networks; higher values spend more of the small PSP bandwidth budget on parity.
Web UI: Configuration → Video → HEVC Mode
Default: 0 (auto)
Config key: hevc_mode
Valid values: 0 (auto), 1 (never advertise), 2 (always 8-bit), 3 (always 10-bit/HDR)
Controls whether the server tells clients it supports HEVC.
PSP recommendation: 0 or 1. The PSP does not support HEVC — this setting doesn't affect PSP streaming either way.
Web UI: Configuration → Video → AV1 Mode
Default: 0 (auto)
Config key: av1_mode
Valid values: 0 (auto), 1 (never), 2 (always 8-bit), 3 (always 10-bit)
Same as hevc_mode but for AV1 codec.
PSP recommendation: 0 or 1. The PSP does not support AV1.
Web UI: Configuration → Video → Headless Mode
Default: disabled
Config key: headless_mode
Valid values: enabled, disabled
Allows streaming without a physical monitor connected. Useful for dedicated streaming servers.
PSP recommendation: disabled for normal use. Enable only if your PC has no monitor attached. Note: first connection with headless mode may show incorrect codec capabilities until reconnection.
Earlier hardware tests covered 14 encoder combinations on PSP at the old low-resolution profile. Keep the encoder choices below, but use the v1.2 preset ladder for stream size, frame rate, bitrate, packet size, and audio state:
| Rank | Configuration | Peak FPS | Decode Latency | Stability | Notes |
|---|---|---|---|---|---|
| 1 | LowLat HQ + Speed + VBR | 38.2 | 25.9 ms | Excellent | Best overall |
| 2 | Quality preset | 28.1 | 35.2 ms | Excellent | Best visual quality |
| 3 | QP 22 | 16.1 | 33.2 ms | Good | Strong fallback |
| 4 | VBAQ Off | 20.0 | 27.7 ms | Good | Alternative |
| 5 | HRD Enforced | 12.7 | 35.6 ms | Fair | Unnecessary constraint |
| — | Baseline (current) | — | — | Failed | Decode errors |
| — | CQP mode | — | — | Failed | Ignores bitrate limit |
| — | CBR+Balanced+HRD | — | — | Failed | Over-constrained |
encoder = amdvce
amd_usage = lowlatency_high_quality
amd_quality = speed
amd_rc = vbr_latency
amd_coder = cavlc
amd_enforce_hrd = disabled
amd_preanalysis = disabled
amd_vbaq = enabled
qp = 28
fec_percentage = 35
hevc_mode = 0
av1_mode = 0