Here is a setup tool for the Radiomaster MT12 to quickly setup the most of your RC-Car and save this for every track and more. If you like that you can support me with a donation via PayPal to a.kassner@live.de. To download it click on MT12 Quick Setup.zip
A professional Lua script for the RadioMaster MT12 transmitter, specifically optimized for RC cars. This script replaces the default screens with an RC-car-specific dashboard and provides extensive tuning and configuration options directly from your MT12 interface.
- RC Car Optimized Dashboard: Telemetry and status data tailored to surface vehicles.
- 5-Page Main Menu: Quick switching between different telemetry, telemetry log, and driving views.
- Extensive Setup Submenu (7 Pages): Complete control over driving aids and setups, including ABS and Gyro steering configurations for the Radiolink R6FG receiver.
- Model & Utility Submenu (3 Pages): Easy loading/saving of model profiles, an integrated lap timer, and custom LED lighting controls.
- Clean, dedicated displays for live telemetry, speed tracking, battery voltage, and driving statistics in a real RC car style.
- ABS Configuration: Fine-tune braking pulse width, frequency, and duty cycle.
- Gyro Steering: Direct control of gyro sensitivity and stability control for receivers like the Radiolink R6FG.
- Plus 5 additional pages covering servo travel, expo curves, trims, and vehicle-specific setups.
- Model Management: Quick actions to load, save, and backup your vehicle profiles.
- Lap Timer: Powerful lap counter supporting up to 999 laps with best-lap tracking.
- LED Control: Adjustment of the MT12's lighting effects.
- Connect your RadioMaster MT12 to your PC via USB (in SD Card storage mode) or remove the MicroSD card.
- Copy all files from the folders, just as they appear in the zip file, directly onto the SD card:
/BACKUP /QSetup /SCRIPTS /SOUNDS - Safely eject the card/transmitter and restart your MT12.
- Go to the Model tab in the MT12 Model Settings..
- Select an empty slot for a new model.
- Press the scroll wheel and select Restore Model.
- Select QSetup for standard configuration or QS4WS for 4-wheel steering.
- Press the scroll wheel again and select the new model.
- Return to the main menu using EXIT and press the TELE button.
- Use the MT12's scroll wheel and buttons to navigate between the main menu and submenus.
NOTE: The scripts I created run only on firmware versions 2.10.0 through 2.10.6. To install a compatible firmware version, go to https://buddy.edgetx.org/#/flash?source=cloudbuild&version=v2.10.6&target=mt12
Use at your own risk. I assume no liability for correct operation or for any damage caused by the use of my scripts.
This project is licensed under the MIT License - see the LICENSE file for details.
Ein professionelles Lua-Skript für die RadioMaster MT12 Fernsteuerung, speziell optimiert für RC-Cars. Das Skript ersetzt die Standardanzeigen durch ein fahrzeugspezifisches Dashboard und bietet umfangreiche Einstellungs- und Tuning-Möglichkeiten direkt über die MT12.
- RC-Car Optimiertes Dashboard: Alle fahrrelevanten Telemetrie- und Statusdaten im typischen RC-Design.
- 5-seitiges Hauptmenü: Schneller Wechsel zwischen verschiedenen Telemetrie- und Analyse-Anzeigen.
- Umfangreiches Einstellungs-Untermenü (7 Seiten): Volle Kontrolle über Fahrhilfen und Setups (u. a. ABS und Gyro-Lenkung für den Radiolink R6FG Empfänger).
- Modell- & Tool-Untermenü (3 Seiten): Einfaches Laden/Speichern von Modellen, ein integrierter Lap-Timer sowie eine LED-Steuerung.
- Übersichtliche Displays für Telemetrie, Geschwindigkeit, Spannungen und Fahrdaten im RC-Car-Stil.
- ABS-Konfiguration: Feineinstellung von Pulsweite, Frequenz und Bremstrommel-Verhalten.
- Gyro-Lenkung: Direkte Kontrolle der Kreisel-Empfindlichkeit für Empfänger wie den Radiolink R6FG.
- Sowie 5 weitere Seiten für Servowege, Expo-Kurven, Trimmungen und modellspezifische Setups.
- Modell-Management: Schnelles Laden, Speichern und Sichern deiner Fahrzeugprofile.
- Lap-Timer: Leistungsstarker Rundenzähler für bis zu 999 Runden inklusive Bestzeiten-Anzeige.
- LED-Steuerung: Anpassung der Lichteffekte der MT12.
- Verbinde die RadioMaster MT12 per USB mit dem PC (im SD-Karten-Modus) oder entnehme die MicroSD-Karte.
- Kopiere alle Dateien in den Ordnern wie in der Zip-Datei direkt in die SD-Karte:
/BACKUP /QSetup /SCRIPTS /SOUNDS - Trenne die Verbindung sicher und starte die MT12 neu.
- Gehe in den Modelleinstellungen der MT12 auf die Registerkarte Modell.
- Wähle einen freien Slot für ein neues Modell.
- Drücke die Radtaste und wähle Modell wiederherstellen.
- Wähle QSetup für Standard oder QS4WS für 4-fach Lenkung aus.
- Drücke die Radtaste erneut und wähle das neue Modell aus.
- Gehe mit EXIT zurück in das Hauptmenü und drücke die Taste TELE.
- Nutze das Drehrad und die Tasten der MT12, um zwischen dem Hauptmenü und den Untermenüs zu navigieren.
HINWEIS: Die von mir erstellten Scripts laufen nur auf den Firmware-Versionen 2.10.0 bis 2.10.6.
Zum installieren einer passenden Firmware gehe zu
https://buddy.edgetx.org/#/flash?source=cloudbuild&version=v2.10.6&target=mt12&selectedFlags=language%3DDE
Benutzung auf eigenes Risiko. Ich übernehme keinerlei Haftung auf korekte Funktion oder jeder Art von Schäden welche durch die Nutzung meiner Scripts verursacht wurden.
Dieses Projekt ist unter der MIT-Lizenz lizenziert – siehe die LICENSE-Datei für Details.