All pull requests

Pull requests

• Add stm32c5a3nucleo

  #4437·UweBonnes opened Nov 5, 2026Contributor·

  ·
  13

• dwc2 host: retire an aborted non-periodic DMA channel at its halt

  Port DWC2
  #4430·jedgarpark opened Nov 4, 2026·

  ·
  1

  5

• audio host: on capture overrun drop the oldest frames (needs rework for host HWFIFO)

  Prio 📌
  #4424·hathach opened Nov 4, 2026Owner·

  ·
  3

• fix(dcd/dwc2): Fix reaction on back2back short SETUP packets

  Port DWC2
  #4423·tore-espressif opened Nov 4, 2026Contributor·

  ·
  11

• hcd: clamp received IN bytes to the transfer buffer on dwc2 and fsdev

  Port DWC2Port FSDev
  #4421·sage-mode-hunter opened Nov 4, 2026Contributor·

  ·
  4

• dfu runtime: detach callback after the status stage or on bus reset (needs rework)

  Port ChipIdea
  #4420·hathach opened Nov 4, 2026Owner·

  ·
  4

• dfu: check interface class when opening DFU interfaces

  Prio 📌
  #4418·kasjer opened Nov 3, 2026Collaborator·

  ·
  1

  5

• hil: reap cleanup holders in test teardown

  #4416·Firat17aze opened Nov 3, 2026Contributor·

  ·
  1

  9

• Preserve pending bulk UVC payloads across COMMIT

  #4415·ladyada-eagleclaw opened Nov 3, 2026Contributor·

  ·
  166

• feat:device-Added usb device address callback and getter

  #4413·gernotwalserxh opened Nov 3, 2026Contributor·

  ·
  9

• dwc2/esp32h4: set TRDT to 9 for the FS PHY

  Port DWC2
  #4412·YanKE01 opened Nov 3, 2026·

  ·
  2

• host: bound cdc and midi wMaxPacketSize to the endpoint buffer

  #4409·sage-mode-hunter opened Nov 3, 2026Contributor·

  ·
  9

• Fix hardware-free tooling, CI and BSP follow-ups

  Prio 📌
  #4406·hathach opened Nov 3, 2026Owner·

  ·
  10

  31

• cxd56: fix spresense bsp build and add it to the CI matrix

  #4401·anirudh12032008 opened Nov 2, 2026Contributor·

  ·
  1

  5

• code-size: default diff base to origin/master

  #4400·anirudh12032008 opened Nov 2, 2026Contributor·

  ·
  1

  7

• msc device: check READ10/WRITE10 length against the LUN block size

  #4399·sage-mode-hunter opened Nov 2, 2026Contributor·

  ·
  8

• msc host: validate bNumEndpoints and endpoint bLength in msch_open

  #4394·anirudh12032008 opened Nov 2, 2026Contributor·

  ·
  1

  8

• device/msc: end a short READ10 Data Stage, drop armed transfers at a BOT reset, hold async I/O across resets; on RP2040 pad short replies

  Prio 📌
  #4389·HiFiPhile opened Nov 1, 2026Collaborator·2/2·

  ·
  4

  60

• usbd: drop a transfer completion for an unbound endpoint

  Prio 📌
  #4385·HiFiPhile opened Nov 1, 2026Collaborator·

  ·
  4

• rp2040/dcd: fix OUT data loss, E15 SOF and re-arm panics, a DPRAM leak on re-open and clear-halt races; dcd: abort without a stall

  Port RP2Prio 📌
  #4376·HiFiPhile opened Oct 31, 2026Collaborator·1/2·

  ·
  4

  30

• NCM throughput: early OUT re-arm, net_lwip_webserver tuning, U5 slave-mode TX wedge fix

  Prio 📌
  #4373·HiFiPhile opened Oct 31, 2026Collaborator·

  ·
  21

• rusb2: complete double-buffered bulk IN transfers on BEMP

  Port RUSB2Prio 📌
  #4341·HiFiPhile opened Oct 26, 2026Collaborator·

  ·
  1

  4

• Run PVS-Studio over every configuration and fix its findings

  Port ChipIdeaPort DWC2Port EHCIPort FSDevPort MAX3421Port MSP430Port MUSBPort nRFPort NuvotonPort OHCIPort RP2Port RUSB2Port SAMDPort WCH USBFSPort WCH USBHSPrio 📌
  #4335·hathach opened Oct 26, 2026Owner·

  ·
  33

• dwc2: arm EP0 OUT status stage DMA at the setup buffer

  Port DWC2Prio 📌
  #4333·HiFiPhile opened Oct 26, 2026Collaborator·

  ·
  1

  4

• rp2 hcd (RP2350): stop the interrupt endpoint polls before EPX starts from idle

  Port RP2
  #4313·arlaneenalra opened Oct 25, 2026·

  ·
  8