Skip to content

About

No description, website, or topics provided.

Resources

Stars

43 stars

Watchers

22 watching

Forks

Repository files navigation

RC Electronics

English | Deutsch

Logo
ℹ️

This page and the accompanying repositories are mostly for my rc (radio controlled models) electronics including EdgeTx/OpenTx and ExpressLRS addons, LUA-scripting, videos, and more.

⚠️

No AI generated code inside, all errors are human!

1. Foreword

ℹ️
To the german readers

Die alte Seite ist noch (und bleibt auch) als Old.adoc verfügbar.

2. IEEE: the RC software compound (stack)

Using EdgeTx, ExpressLRS and ESCape32 is the combination of RC related open-source software projects that I use now in all my crafts.

ℹ️

The three big E`s: `EdgeTx, ExpressLRS and ESCape32

If I need something like return-to-home I would choose clearly INAV. So, putting all together, you get EEEI.

❗

If you push EdgeTx, ExpressLRS, ESCape32 and INAV onto a stack, pop them off and take their first character, you’ll get IEEE, the RC software stack (please do not confuse with https://www.ieee.org, that’s another crucial thing ;-) ).

3. Documents

The content of this page is split into the following documents. The Detailed table of contents lists every section with a direct link. The Project status shows the state of every project. All videos are listed in Videos by project.

3.1. Software, firmware and protocols

Document Contents

EdgeTx

ExpressLRS

Protocols

CRSF protocol extensions (MultiSwitch, Prop32, ESP-NOW), CRSF half-duplex bus, Hardware-Extension-Protocol:

ESCape32: firmware for a family of small/medium BLDC (and brushed) motor controller (brushless/brushed ESC)

ESCape32 firmware for small/medium BLDC (and brushed) ESCs and my modifications:

INAV: Navigation-enabled flight control software

INAV and the self-balancing robot Mortimer.

FlySky FS-i6X / FS-i6S

Building firmware

Compiling my projects (wmucpp), EdgeTx, ExpressLRS and ESCape32 with github codespaces:

3.2. Projects (hardware and firmware)

Document Contents

MultiSwitch

ELRS/CRSF MultiSwitch modules, MultiSwitch NG Widget, stable MultiSwitch Widget and telemetry script.

CRSF devices

LED 4x4, CRSF-Switch/Router, MultiAdapter, RC-Relay32, CRSF to Serial-Servo converter:

Cruise-Controller

Double Schottel-Control (RC720E) and the CruiseController:

ELRS receivers as transmitter modules

Transmitter modifications

RC-Desk

Motor controllers

Receivers for 27/35/40MHz

Corona RP8D1 replacement firmware and SDR receiver:

Miscellaneous projects

STM32G0B1 development board, simple main power switch:

3.3. Project status

Every project page starts with a Project info box (status, hardware, firmware, software, links). New projects use the project template.

Table 1. Status legend

🟢 active

under active development

🔵 stable

finished and in use; maintenance only

🟡 experimental

working partially / under test

📝 planned

idea or design, not yet usable

⚪ superseded

replaced by another project; kept for reference

Project Document Status

MultiSwitch-E8

MultiSwitch

🟢 active

Super simple MultiSwitch

MultiSwitch

🟢 active

MultiSwitch 16-Outputs PCB

MultiSwitch

🟢 active

Nucleo-G031K8 as a MultiSwitch

MultiSwitch

🟢 active

WeAct STM32G031F8 as a MultiSwitch

MultiSwitch

🟢 active

WeAct ESP32-C3 Core Board as a MultiSwitch

MultiSwitch

🟡 experimental

WeAct MultiSwitch THT PCB

MultiSwitch

🔵 stable

MultiSwitch NG Widget

MultiSwitch

🟢 active

MultiSwitch Widget

MultiSwitch

🔵 stable

MultiSwitch Telemetry Script

MultiSwitch

🔵 stable

LED 4x4 Module

CRSF devices

🟢 active

CRSF-Switch / Router

CRSF devices

🟢 active

ELRS-MultiAdapter-EA

CRSF devices

🔵 stable

RC-Relay32

CRSF devices

🟢 active

CRSF to Serial-Servo Converter

CRSF devices

🟢 active

Double Schottel-Control / Cruise-Controller (RC720E32)

Cruise-Controller

🟢 active

The CruiseController

Cruise-Controller

⚪ superseded

RC-Desk

RC-Desk

🟢 active

RC-Desk mini

RC-Desk

🟢 active

Renewed mainboard for vintage transmitters

Transmitter modifications

🟡 experimental

Touch-Screen for the FrSky X12S

Transmitter modifications

🔵 stable

SFrog 5D Sticks for the FrSky X12S

Transmitter modifications

🔵 stable

Graupner / JR 40MHz RF module for modern radios

Transmitter modifications

🔵 stable

TX16s internal switch controller

Transmitter modifications

🔵 stable

Haptic-control stick

Transmitter modifications

📝 planned

JR-module-bay adapter for ELRS RX-as-TX

RX-as-TX

🔵 stable

X12S internal ELRS adapter

RX-as-TX

🔵 stable

FlySky-I6X-rs

FlySky

🟢 active

FlySky-I6S-rs

FlySky

🟢 active

i6s-cpp (C++26 port)

FlySky

🟢 active

ELRS for the FlySky-I6X

FlySky

🔵 stable

Openix6

FlySky

🔵 stable

Brushed DC-motor controller

Motor controllers

🟡 experimental

V/ESC

Motor controllers

🟢 active

Corona RP8D1 replacement firmware

VHF receivers

🔵 stable

SDR RC receiver for 27/35/40MHz

VHF receivers

🟡 experimental

WM STM32G0B1 development board

Misc

🔵 stable

Simple RC main power latched switch

Misc

🔵 stable

Mortimer (self-balancing robot)

INAV

🟡 experimental

EdgeTx: Virtual Controls

EdgeTx

🟢 active

EdgeTx: 32-channels extension

EdgeTx

🟢 active

EdgeTx: SHM-Variables for B&W radios

EdgeTx

🔵 stable

EdgeTx: CRSF BATT frames with sensor-id

EdgeTx

🟢 active

ESCape32 (modifications)

ESCape32

🟢 active

3.4. Gear

Document Contents

Actual gear

My actual RC gear and modifications:

Vintage RC

4. Projects

The documents listed in Documents describe some of my active projects. The majority of my former projects (see Old (in german)) are in a frozen state now. This is due to the fact that I completely shifted the µCs from the AVR-family (DA, DB, tiny1/2) to the more powerful STM32-family, mainly the STM32G4xx and STM32G0xx. These have enough computing resources for the SDR RC receiver for 27/35/40MHz project, which would have been impossible sticking to the AVRs. And the G0xx also have enough internal peripheral to comfy realize all that crazy rc stuff.

Well, there is one exception: the Corona RP8D1 replacement firmware.

4.1. Logo

Despite the fact that I publish all my projects as open-hardware (mostly CC licensed) and open-source (most GPLV3 licensed) I use the following logo on the physical projects.

Logo
Figure 1. Logo (License of the logo: CC BY-NC-ND 4.0) (click to enlarge)

4.2. Hardware designs available on OSHWLab

An increasing number of PCB designs are available on OSHWLab.

5. OpenTx / EdgeTx weekly

OpenTx weekly is a YouTube-channel mostly for EdgeTx and OpenTx stuff but also for my above electronic projects. Unfortunately the spoken language is german :-(

All videos of the channel, sorted by project: Videos by project. Every Project info box also lists the videos of the project.

On Holger Meyer you may find an up-to-date table of contents.

6. Detailed table of contents

All sections of the former single-page README with a link to their new location. The anchors of the former page are kept here, so old links like README.adoc#elrs-mods-v4 still lead to the right place.

7. License

Please see License, as far as not other licenses apply (e.g. in the source code).

8. Contact

About

No description, website, or topics provided.

Resources

Stars

43 stars

Watchers

22 watching

Forks

Releases

Packages

Contributors

Languages